A fast and accurate method to measure misalignment is ensured by Gates unique laser alignment device, LASER AT-1.

Mounted in a few seconds, the laser line projected onto the targets allows you to quickly ascertain and correct misalignment. The LASER AT-1 identifies parallel as well as angular misalignment between the pulleys and is suitable for pulley diameters of 60 mm and larger. It is so light it can be mounted on non-magnetic pulleys with the double sided adhesive tape and used on both horizontal and vertical shaft installations.

Advantages

• For both V-belts and synchronous belts.
• Shows parallel and angular misalignment between the pulleys.
• Much faster and more accurate than measuring with earlier, conventional methods.
• For both horizontally and vertically shaft machines.
• Alignment can be made by one operator.
• Also suitable for non-magnetic pulleys.

Technical characteristics

• Pulley diameters ? 60 mm
• Beam angle 78
• Measurement distance 10 m (33 ft)
• Battery 1 x R6 (AA) 1.5 V
• Battery operation 8 hours continuously
• Laser class 2
• Output power < 1 mW
• Laser wave length 635 670 nm
• Temperature range -10C up to +50C
• Housing ABS plastics
• Back plate Anodised aluminium
• Weight 0.25 kg
• Dimensions W 147 mm x H 87 mm x D 28 mm

Calibration accuracy: Offset < 0.5 mm
Angle: < 0.1
Targets: 2 pieces magnet targets with adjustable centre line
Light weight: Because of its light weight it can be mounted on non-magnetic pulleys with double-sided adhesive tape.